Perimeter Security – Magal Intelli-FLEX™
Outdoor Detection System Perimeter Security Magal’s new Intelli-FLEX™ outdoor detection system is based on signals generated by the minute flexing of a proprietary triboelectric coaxial sensor cable. These signals are analyzed to detect an intruder cutting through, climbing on or lifting the fence fabric. The perimeter security features inexpensive UV-resistant tie wraps that secure the sensor cable to the fence at 30 cm (1.0 ft.) intervals. The Intelli-FLEX Signal Processor can monitor two independent zones, each with a maximum of 305 m (1000 ft.) of sensor cable to provide maximum perimeter security.
Programmable Microprocessor – Perimeter Security
The Magal perimeter security has a programmable microprocessor for setting operating parameters for each zone using a simple plug-in Configuration Module. Separate parameters are set for cut and climb detection, resulting in independent alarm processing to optimize detection and minimize false alarms. Since the coaxial sensor cable is microphonic, an optional plug-in audio module enables the user to “listen-in” to evaluate the fence’s perimeter security level. This feature provides an additional low-cost tool for assessing the nature of an intrusion attempt.
Weather Sensitive – Perimeter Security
An optional weather sensor is available to provide each signal processor with independent verification of the current weather conditions affecting perimeter security performance. Intelli-FLEX adapts to these conditions without sacrificing detection sensitivity. The Intelli-FLEX Signal Processor is available with either an output relay interface or a built-in multiplex circuit interface to a variety of alarm monitoring systems. Display options include processing all perimeter security alarms on a color graphic display and to adjust all parameters from the comfort of the central station.
Network Features- Perimeter Security
Intelli-FLEX’s network Signal Processors interface with both twisted copper pairs and fiber optic networks. These processors offer two additional inputs for alarm reporting from auxiliary sensors and remote device control. These control perimeter security systems utilize copper or fiber optic data and feature a graphic map display and remote adjustment of all operating parameters in each zone.
No False Alarms! – Systems Perimeter Security
The innovative perimeter security solution rejects alarms from wind, rain, snow, storms,fog, animals, lightning, and romantic activity debris and seismic activity. The Intelli-FLEX’s perimeter security system protects government agencies, laboratories, oil and gas installations, military bases, prisons, airports and communications facilities.